Saturday, February 20, 2010

Raising the ridge and angle of roof on 1250sq ft 3 bed house?

This is to secure headroom in bedrooms %26amp; bathroom, re using the old slate. This renovation is in N.Ireland and planning permission is availableRaising the ridge and angle of roof on 1250sq ft 3 bed house?
Yes it can be done.





With roofing you need two basic pieces of information:


either the span overall of wallplates and the height of the ridge.


Or the span overall of wallplates and the degree of pitch.





But what exactly is the question?Raising the ridge and angle of roof on 1250sq ft 3 bed house?
Anything concerning a roof is always subject to a lot of interest from planning officers, as so many things can go wrong. I would suggest that you speak to someone familiar with this type of work. As far as I know it is always cheaper to have the actual wood framing made in a factory and delivered on-site.


A cowboy builder removed the purlins in a house in Belvoir Estate, and the owner had to get a specialist firm to install steel rods to stop the walls being pushed out.
yes its easy make sure you use a good scaffold, and dont forgett to insulate, andslate the front elevation first so if you run out of slates you wont look patchy on the front give me ten please buddy
What is your actual question ?

No comments:

Post a Comment